fixmyspeaker.com
FixMySpeaker.com is a specialized shop for subwoofer rebuilds, repairs, parts, and custom work—mostly aimed at high-performance car and home audio drivers. It’s not one of the “water eject” phone-speaker sites that look similar by name; this one is about physical loudspeaker hardware: recone kits, coils, spiders, adhesives, and in-house rebuild services.
What FixMySpeaker.com actually offers
The site positions itself as a full-service subwoofer repair and testing facility that supports customers directly and also supplies parts and rebuild services to manufacturers. In practice, that means two main lanes:
- You send a driver in (or work with them remotely) to get a repair/rebuild/customization plan.
- You buy parts—either individual components or a custom “drop-in” recone kit—so you (or your installer) can rebuild the subwoofer.
They also mention the ability to provide testing-related info like parameters and enclosure recommendations, which matters if you’re trying to match performance rather than just “make it play again.”
Repairs vs recones: what the words mean in real life
If you’re new to subwoofer repair language, “repair” can be a small, targeted fix. “Reconing” is usually the bigger job: replacing the moving assembly (typically cone, surround, spider(s), lead wires, voice coil—depends on the design). FixMySpeaker.com explicitly separates pricing in that way, saying repair services start at $25 and reconing services start at $100, with the reminder that pricing varies by speaker and scope.
That pricing “start” is important. A high-excursion driver with a complex motor, dual spiders, custom coil options, direct-connect terminals, etc., is not going to price like a basic stamped-basket woofer.
The parts shop: what you can buy (and why it matters)
Their “Subwoofer Parts” section is basically a catalog of the same kinds of components used in performance builds and rebuilds: adhesives, voice coils by size (2.5", 3", 3.5", 4"), spiders/spacers, leadwire, terminals/direct connects, cones, dustcaps, baskets, shims, mounting gaskets, soldering supplies, tools, and even cosmetic add-ons like decals and color coating.
Two details worth calling out if you’re deciding between buying individual pieces vs a kit:
- They sell custom built drop-in recone kits, and they’re pretty blunt that buying a pile of separate parts can cost more and can fit worse if you’re guessing. Their guidance is basically: submit a service request first, then buy the kit that matches your driver and goals.
- They publish specific install notes on some products and adhesives (for example, glue selection warnings), which is useful because the wrong adhesive choice is a common reason DIY recones fail later.
How their service request workflow works
FixMySpeaker.com uses a service request system to quote and plan work. Their service request page explains the logic: you’re paying for time spent reviewing your info and returning a detailed response on options and pricing.
- A standard service request is framed as a paid review/quote process.
- An expedited service request is $30 and is described as getting a response within 48 hours; they also state that 50% of that payment is applied toward your purchase (rebuild kit, shop work, or parts).
One more real-world note: demand fluctuates. Their “Expedited Service Request” product page has a message about temporarily suspending new service request submissions at times due to volume, while continuing to ship parts orders. So if you hit a wall trying to submit, it may not be you.
Wait times and what they imply for planning
The site lists estimated wait times (not guarantees) that are tied to after payment is received. The ranges they show include:
- Service Request: 5–7 business days
- Expedited Request: 48 hours
- Custom Recone Kits: 15–20 business days
- Rebuilds done at their shop: 15–35 business days
If you’re building a system on a deadline (competition season, a shop install appointment, a customer job), those numbers basically mean you should treat custom work like a small project, not a quick order.
DIY parts vs sending the sub in: how to choose without overthinking it
A decent way to decide is to be honest about your goal:
- If you just need it working and the driver is common, a straightforward repair or an off-the-shelf parts approach might be fine.
- If you need it working and matching a specific performance target, you want the recone parts to be correct as a system—coil winding, former, spider pack stiffness, leadwire routing, surround geometry, even dustcap choice if it changes moving mass. That’s where a custom kit or shop rebuild makes sense.
They also mention offering testing-related outputs like parameters and enclosure recommendations. That’s a signal they expect customers who care about alignment, tuning, and not just “it plays bass.”
A quick warning about similarly named “speaker cleaner” sites
This matters because people routinely type the wrong domain. FixMySpeaker.com is the subwoofer rebuild/parts business. There are other sites with near-identical names that focus on playing tones to eject water from phone speakers (different product, different audience). If you landed here looking to fix muffled phone audio, you’re on the wrong kind of “speaker fix.”
Key takeaways
- FixMySpeaker.com focuses on subwoofer repair/rebuild/custom recone work and parts, not phone-speaker “water eject” tools.
- Services list repair starting at $25 and reconing starting at $100, with pricing varying by driver and scope.
- Their parts store covers core rebuild components (coils, spiders, cones, dustcaps, shims, adhesives) and more.
- Service requests have published timing targets (standard vs expedited) and the expedited option describes partial credit toward purchases.
- Plan around lead times: custom kits and in-shop rebuilds are listed in weeks, not days.
FAQ
Is FixMySpeaker.com the site that ejects water from a phone speaker?
No—FixMySpeaker.com is about subwoofer parts and rebuild/repair services. The phone “water eject” tools tend to live on other, very similar domains.
What’s the difference between a repair and a recone on their services page?
They present them as different service levels, with different starting prices (repair vs reconing). In speaker terms, reconing is typically the more complete replacement of the moving assembly.
How long does it take to get a response or get parts built?
They publish estimates like 5–7 business days for a standard service request, 48 hours for expedited, and 15–20 business days for custom recone kits. In-shop rebuilds are listed at 15–35 business days.
Can I just buy random parts and build my own recone kit?
You can buy individual parts, but they specifically warn that self-configuring can cost more and fit/performance can be worse than ordering a complete custom kit via service request.
Do they ever stop taking new service requests?
Yes, at least sometimes. Their expedited service request product page includes a notice about pausing new service request submissions due to demand, while still shipping standard parts orders.
Post a Comment